Onduleur Mercury UPS Elite 2200U SMART 2200VA/1320W
85 000 CFA
Capacité 2200VA
Affichage LCD
AVR intégré (régulateur de tension automatique)
Large gamme de tension d’entrée
Protection contre les surcharges et les courts-circuits
Gestion intelligente de la batterie
Redémarrage automatique
Protection contre les décharges profondes de la batterie et
protection contre les surcharges
Description
Onduleur Mercury UPS Elite 2200U SMART 2200VA/1320W
Cet onduleur Mercury UPS Elite 2200U fournit une alimentation par batterie temporaire, en cas de panne de courant.
Analyse des pannes de batteries avec alerte précoce, permettant ainsi d’effectuer à temps une maintenance préventive. En plus de cela, cet onduleur est un régulateur de tension.
| Capacity PF |
2200VA/1320W 0.6 |
| Input Nominal Voltage Voltage Range Frequency Range Input Type Input Breaker |
220 VAC 140-300VAC(Double boost) 50/60Hz (Auto Sensing) Schuko Power cord YES |
| Output Output voltage Boost Ratio Buck Ratio Output Voltage Range(batt.mode) Frequency Range(batt.mode) Transfer time waveform (batt.mode) Outlet Type Full ProtectionLine mode overload Battery mode overload |
220 VAC 1.2/1.4 0.85 ±10% 50/60Hz +/- 1% 4ms Typical Simulated Sine-wave UN*4 Overload, Short Circuit, Over discharge and Over charge. >(110%+10)% fault after alarm 1min >(120%+10)% fault immediately >(110%+10)% fault after alarm 1min >(120%+10)% fault immediately |
| Battery Battery Voltage Battery type&number Typical Backup Time (Based one PC) Typical Recharge Time |
24V 12V/9AH*2 60mins @ 1 PC Load With 15″ moniter 8hours to 90% of capability |
| Indicators Display Alarm |
LCD Battery mode: Sounding every 30 seconds Low battery: Sounding every 2 seconds Over load: Sounding every 0.5 seconds Fault: Continuous sounding |
| Physical Dimension(W*H* D) (mm) Net Weight (kgs) |
148mm x 178mm x 298mm 10.8 |
| Interface USB Port |
YES |
| Environment Temperature & HumidityNoise Level |
0°C to +40°C, 0 to 90% Relative Humidity (Non-condensing) Less than 45dB |
